evo²

Spreader Cloth Details

Quality spreader cloth with Velcro securing system for quick easy changes.

Classic ice resurfacing: A terry cloth or felt cloth (wiper cloth) is used to spread the water over the ice. We recommend using terry cloth at temperatures above 77°F or 25°C and felt at lower temperatures.

Electric Towel Lift Details

Classic ice resurfacing, with special protection for the wiper: It only comes into contact with the ice surface when water is applied and remains in the raised position at all other times. This prevents the wiper cloth from freezing onto the ice surface during standstill times and protects it from ground dirt, thus giving it a longer service life.

The advantages for you:

Clean water application, even over extended periods of time. When you begin to clean the ice, drive for the first few metres with the wiper raised and lower it only onto the snow-free surface. This keeps the wiper free of snow, thus ensuring even water distribution and an optimal ice surface in a rapid time frame. If the vehicle is switched off while on the ice surface, the wiper raises automatically, making freezing impossible.

ICEplus Details

Required equipment: water pump

ICEplus is an innovative water spraying system that completely eliminates the need for a towel. With its combination of purpose-developed, low-pressure nozzles, the system applies water to the ice surface evenly and without creating spray mist. This saves water and energy.

The advantages for you:

A shiny, mirror-smooth ice surface! The innovative nozzle system distributes the water evenly without a wiper cloth and ensures better water penetration in deep gouges. The low-pressure system minimises overspray, so air humidity does not rise in the arena. Water droplets do not land on sections which have already been covered, and the rapid freezing time increases energy efficiency. Watch video - ICEplus

ICEplus Flexi Details

Required equipment: water pump

The advantages for you:

ICEplus Flexi gives you the best of both worlds. This innovative spraying system can be used in combination with a traditional towel. At the press of a button, the operator can decide whether to apply water with or without a towel. Watch video - ICEplus Flexi

Automated Ice Edger Details

The ice edge is attached to an arm on the frame of the vehicle and is independent of the brush. It has a diameter of 13 3/4", is fitted with 12 reversible blades, and is made of stainless steel. The edger is extended and retracted by means of a hydraulic cylinder and is controlled from the driver’s cab using a push botton. The cutting depth can be continually adjusted using a rotary knob. With its 3 contact rollers and spring deflection of 2", the edger follows the contours of the rink to perfection, leaving behind it a 13 3/4" wide strip for the conditioner runners. The WM ice edger is an absolute highlight feature of outstandingly robust, durable construction.

The advantages for you:

“Not a step on the ice” is our motto. Ice close to the boards can be prepared for the next championship match quickly, comfortably and safely, without getting your feet wet. Cutting depth can be adjusted from the driver’s cab (up to -1/4" - 6 mm). The edger shaves off bumps in the ice with ease and can be retracted after use. Brushes and edgers can be used both separately and at the same time.

Dynamic Steered Wheel Wash Details

The water pump provides water to the tire spray bars. It draws the water from the water tank and provides constant pressure, irrespective of the water tank level. The spray bars rotate with the front tires to insure proper spray contact thru all driving operations

The advantages for you:

Cleaner ice surface, exceptional ease of operation - right down to the very last drop of water.

Wash Water Multijet Details

The ice wash system is located behind the blade on the conditioner unit. The system’s nozzles spray water onto the freshly planed ice, flushing out snow residue, hair, skin particles, sand or dust. A rubber squeegee at the rear of the conditioner unit wipes away excess water, which is then sucked up by a vacuum pump and transported into the snow tank for disposal.

The advantages for you:

Pristine-clean ice is a guarantee: The spray nozzles flush out residual snow and dirt, and the dirty water is sucked up by a vacuum pump, after which the ice can be built up on a spotless surface with the wiper cloths or the ICEplus system. This leads to clearer, more transparent ice, enhancing the visibility of in-ice advertisements. The new layer of ice also binds more quickly, with resultant savings on energy.

Water Sprayer Details

The water sprayer consists of a high-performance water pump which is integrated into the vehicle, and a spray head at the rear. The sprayer distributes a large quantity of water over the entire ice surface in an extremely short time and is fully controllable from the convenience of the driver’s cab: The quantity and spraying distance can be continuously adjusted even while driving. Through the innovative development and design of the spray head, the spray patterns and droplet shape have been improved upon once again: Water is distributed onto the surface in the largest-possible droplets, minimising trapped air and greatly simplifying ice build-up and levelling. The spray head can be easily detached from the machine by hand after use and is simple to store.

The advantages for you:

“Not a step on the ice” is our motto: The water sprayer allows the operator to build up ice easily and safely from inside the vehicle. Wet feet are a thing of the past. The newly developed spray head ensures an optimal spray pattern and droplet form, and water quantity and spray height can be controlled from the driver’s cab. Large water droplets are sprayed onto the ice surface and form a closed surface without trapping air. The water sprayer can also be used to level out the ice surface.

Our tip for perfectly smooth ice: Use the water sprayer 3 to 4 times a week after the last resurfacing of the day.

Heated Mirrors Details

The side mirrors feature an extra-large mirror surface with optional heating to prevent fogging. The right rear mirror is supplied as standard. Additional mirrors can be optionally fitted to both the left and right.

The advantages for you:

Optimal overview of the conditioner unit is guaranteed. For narrow working areas, we also recommend mounting side mirrors to the front of the vehicle.

Front Camera Details

The front camera is built into the front of the vehicle, and the operator can view its images on the display in the driver’s cab. On request, a record function can also be installed.

The advantages for you:

In areas of poor visibility, the front camera provides you an additional overview and, thus, greater safety.

Snow Bin Wash System

The vehicle’s central water supply routes water to the snow tank wash system. Water pipes attached to the three outer sides of the snow tank spray the outer walls at the press of a button and wash away all residual snow.

The advantages for you:

Snow is cleared from the driver’s cab to ensure that it is kept clean and in good condition. In particularly stubborn conditions, such as extreme calcification or cold, the wash system helps to remove all snow from the tank.

Horizontal Auger Wash System Details

Required equipment: water pump

The horizontal auger wash system allows the operator to clean out the auger trouble free from the comfort of the driver seat. The vehicle’s central water supply routes water to the auger wash system. This water is sprayed over the entire length of the auger conveyor and cleans it from end to end.

The advantages for you:

If the auger conveyors are about to clog up, you can clean them with absolute ease from the driver’s seat at the press of a button: No need to stop the vehicle, and ice resurfacing can continue uninterrupted. This mode can be activated at any time, on the ice or in the garage.

Vertical Auger Wash System Details

Required equipment: water pump

The vertical auger wash system allows the operator to clean out the auger trouble free from the comfort of the driver seat. The vehicle’s central water supply routes water to the auger wash system. This water is sprayed over the entire length of the auger conveyor and cleans it from end to end.

The advantages for you:

If the auger conveyors are about to clog up, you can clean them with absolute ease from the driver’s seat at the press of a button: No need to stop the vehicle, and ice resurfacing can continue uninterrupted. This mode can be activated at any time, on the ice or in the garage.

Automatic Water Fill System Details

The water-stop valve (electrically controlled valve), installed in the water pipe by specialist technicians, regulates the filling of the ice resurfacer in the garage. The water stop valve is controlled by a cable fitted to the vehicle. The operator sets the required water level on the display; when this quantity has been reached, filling stops and the vehicle switches off in order to save energy.

The advantages for you:

No more wet garage floors! The water stop valve fills your water tank to the precise level you require. After filling, the vehicle switches off automatically – no more flooding, and great savings on water and energy.