WM Shira

The cabin protects you without hindering your driving. Large panoramic windows provide clear 360° visibility, offering full protection from cold and moisture while ensuring maximum driving comfort.

No more collisions! In tight spaces or near obstacles, the acoustic distance warning helps you maneuver and park precisely, avoiding damage to the machine.

Combining an automatic towel and nozzle system gives you maximum flexibility in ice resurfacing. All components are securely mounted on the sledge, allowing you to choose between using the nozzle or the towel for resurfacing at any time. A simple push of a button on the control panel is all it takes.

Automatic status messages enable you to monitor the status of your machine at all times. Provide your service staff with over-the-air direct access to resolve problems or carry out software updates. Access the interactive workspace and order spare parts quickly and easily.

An ice resurfacer wrap is high-impact, cost-effective, and works for all types of businesses. Wrap advertising allows a vehicle to serve as a low-cost mobile billboard.

Underglow lighting, controllable from the driver’s cab, is fitted to the underside of the vehicle and makes for a spectacular entrance. All colour modes (RGB) can be selected from the display at any time, and the system also features a “party mode” with all colours flashing rapidly in sequence. Underglow illumination is installed in all autopilot vehicles, and its colours provide a clearly visible indication of the operational status of the vehicle.

The advantages for you:
Absolutely spectacular! With underglow illumination, the vehicle appears to almost float on the ice, providing an eye-catchingly spectacular show at events. New: The party mode, for an incredibly special lighting effect.

Required equipment: water pump

ICEplus is an innovative water spraying system that completely eliminates the need for a towel. With its combination of purpose-developed, low-pressure nozzles, the system applies water to the ice surface evenly and without creating spray mist. This saves water and energy.

The advantages for you:
A shiny, mirror-smooth ice surface! The innovative nozzle system distributes the water evenly without a wiper cloth and ensures better water penetration in deep gouges. The low-pressure system minimises overspray, so air humidity does not rise in the arena. Water droplets do not land on sections which have already been covered, and the rapid freezing time increases energy efficiency.

The ice edge is attached to an arm on the frame of the vehicle and is independent of the brush. It has a diameter of 13 3/4", is fitted with 12 reversible blades, and is made of stainless steel. The edger is extended and retracted by means of a hydraulic cylinder and is controlled from the driver’s cab using a push botton. The cutting depth can be continually adjusted using a rotary knob. With its 3 contact rollers and spring deflection of 2", the edger follows the contours of the rink to perfection, leaving behind it a 13 3/4" wide strip for the conditioner runners. The WM ice edger is an absolute highlight feature of outstandingly robust, durable construction.

The advantages for you:
“Not a step on the ice” is our motto. Ice close to the boards can be prepared for the next championship match quickly, comfortably and safely, without getting your feet wet. Cutting depth can be adjusted from the driver’s cab (up to -1/4" - 6 mm). The edger shaves off bumps in the ice with ease and can be retracted after use. Brushes and edgers can be used both separately and at the same time.

The water pump provides precision distribution of water to the conditioner unit and the ice wash system. It draws the water from the water tank and supplies it to the vehicle at a constant pressure, irrespective of the water tank level. The pump always supplies the exact quantity of water required by the vehicles, and is based on several parameters (driving speed, steering angle etc.). Unique feature: One single pump supplies every water-consuming component of the vehicle.

The advantages for you:
An outstandingly smooth ice rink, and, with water distribution adapted to the speed and steering angle, exceptional ease of operation - right down to the very last drop of water, and regardless of how much is in the tank. Manual control of water distribution is always possible if desired.

The ice wash system is located behind the blade on the conditioner unit. The system’s nozzles spray water onto the freshly planed ice, flushing out snow residue, hair, skin particles, sand or dust. A rubber squeegee at the rear of the conditioner unit wipes away excess water, which is then sucked up by a vacuum pump and transported into the snow tank for disposal.

The advantages for you:
Pristine-clean ice is a guarantee: The spray nozzles flush out residual snow and dirt, and the dirty water is sucked up by a vacuum pump, after which the ice can be built up on a spotless surface with the wiper cloths or the ICEplus system. This leads to clearer, more transparent ice, enhancing the visibility of in-ice advertisements. The new layer of ice also binds more quickly, with resultant savings on energy.

The water sprayer consists of a high-performance water pump which is integrated into the vehicle, and a spray head at the rear. The sprayer distributes a large quantity of water over the entire ice surface in an extremely short time and is fully controllable from the convenience of the driver’s cab: The quantity and spraying distance can be continuously adjusted even while driving. Through the innovative development and design of the spray head, the spray patterns and droplet shape have been improved upon once again: Water is distributed onto the surface in the largest-possible droplets, minimising trapped air and greatly simplifying ice build-up and levelling. The spray head can be easily detached from the machine by hand after use and is simple to store.

The advantages for you:
“Not a step on the ice” is our motto: The water sprayer allows the operator to build up ice easily and safely from inside the vehicle. Wet feet are a thing of the past. The newly developed spray head ensures an optimal spray pattern and droplet form, and water quantity and spray height can be controlled from the driver’s cab. Large water droplets are sprayed onto the ice surface and form a closed surface without trapping air. The water sprayer can also be used to level out the ice surface.

The water pump provides water to the tire spray bars. It draws the water from the water tank and provides constant pressure, irrespective of the water tank level. The spray bars rotate with the front tires to insure proper spray contact thru all driving operations

The advantages for you:
Cleaner ice surface, exceptional ease of operation - right down to the very last drop of water.

The driver’s seat is fitted with electrical heating, and both the seat and backrest are pleasantly warm. It is easily controlled by just one press of a dashboard button.

The advantages for you:
A heated driver’s seat is a guarantee of comfortable working conditions, even in ice-cold temperatures. Seat heating systems are available for vehicles both with and without a driver’s cab.

The front camera is built into the front of the vehicle, and the operator can view its images on the display in the driver’s cab. On request, a record function can also be installed.

The advantages for you:
In areas of poor visibility, the front camera provides you an additional overview and, thus, greater safety.

The rear-view camera is built into to rear of the vehicle, and the operator can view its images on the display in the driver’s cab. On request, a record function can also be installed.

The advantages for you:
Full rear visibility, without having to turn your head.

4 distance measurement sensors fitted at the front of the vehicle provide an acoustic signal and visual warning, shown on a display in the driver’s cab, of obstacles to the front.

The advantages for you:
No more clashes! In the event of limited space or obstacles, the acoustic warning signal helps you to maneuver and park with pinpoint precision, and without risk of damage.

Required equipment: water pump

The horizontal auger wash system allows the operator to clean out the auger trouble free from the comfort of the driver seat. The vehicle’s central water supply routes water to the auger wash system. This water is sprayed over the entire length of the auger conveyor and cleans it from end to end.

The advantages for you:
If the auger conveyors are about to clog up, you can clean them with absolute ease from the driver’s seat at the press of a button: No need to stop the vehicle, and ice resurfacing can continue uninterrupted. This mode can be activated at any time, on the ice or in the garage.

Required equipment: water pump

The vertical auger wash system allows the operator to clean out the auger trouble free from the comfort of the driver seat. The vehicle’s central water supply routes water to the auger wash system. This water is sprayed over the entire length of the auger conveyor and cleans it from end to end.

The advantages for you:
If the auger conveyors are about to clog up, you can clean them with absolute ease from the driver’s seat at the press of a button: No need to stop the vehicle, and ice resurfacing can continue uninterrupted. This mode can be activated at any time, on the ice or in the garage.

The water-stop valve (electrically controlled valve), installed in the water pipe by specialist technicians, regulates the filling of the ice resurfacer in the garage. The water stop valve is controlled by a cable fitted to the vehicle. The operator sets the required water level on the display; when this quantity has been reached, filling stops and the vehicle switches off in order to save energy.

The advantages for you:
No more wet garage floors! The water stop valve fills your water tank to the precise level you require. After filling, the vehicle switches off automatically – no more flooding, and great savings on water and energy.

Multiple lighting package are available please contact us for more details.

Classic ice resurfacing, with special protection for the wiper: It only comes into contact with the ice surface when water is applied and remains in the raised position at all other times. This prevents the wiper cloth from freezing onto the ice surface during standstill times and protects it from ground dirt, thus giving it a longer service life.

The advantages for you:
Clean water application, even over extended periods of time. When you begin to clean the ice, drive for the first few metres with the wiper raised and lower it only onto the snow-free surface. This keeps the wiper free of snow, thus ensuring even water distribution and an optimal ice surface in a rapid time frame. If the vehicle is switched off while on the ice surface, the wiper raises automatically, making freezing impossible.

Quality spreader cloth with Velcro securing system for quick easy changes.

Classic ice resurfacing: A terry cloth or felt cloth (wiper cloth) is used to spread the water over the ice. We recommend using terry cloth at temperatures above 77°F or 25°C and felt at lower temperatures.